The biggest feature of raspberry pie zero is its size, but this is at the cost of the port. The DIYer figured out how to turn Pi Zero into a dongle computer so that it can connect directly to another computer’s network via USB, making it easier to use.
With a few mods, Node turns Zero into a dongle computer, which means you just have to plug it into your computer and it will start sharing network resources. From there you can SSH or VNC to zero and control it with your laptop or desktop without the need for an additional mouse, screen or keyboard. When you do not want to pull out a bunch of extra gear, this is great for setting up different SD cards or test items. Please go to YouTube for a complete guide.
Just plug it into a free USB port and you can connect to your Pi via USB Ethernet and share your computer’s internet connection without the need for additional cables or power. Zero Stem is welded to the bottom of the Pi Zero and bolted to make it easy to use on the go. Use it to create your own mini plug-and-play virtual machines, VNC servers, proxy servers, or multiple groups into a single cluster.
Raspberry pi Zero Stemp USB Details
Compatible with Pi Zero V1.3 with camera connector and Pi Zero W.
Not compatible with Pi Zero v1.2 (no camera connector)!
Support Raspbian Jessie Pixel and Lite
Need to be installed (see below)
Buy Recommended Hardware
Raspberry Pi Zero Buy Here
3D Print CASE
Micro SD Card (8GB minimum) Buy Here
I’ve been trying to find ways to make better use of my raspberry pi zero and i think i have found one! We are going to build an Raspberry Pi Zero USB Dongle and shared internet with your pc! and install services like webmin, owncloud, and vnc makes for a very compelling pc in your pocket!
Step 1 Assemble the hardware
STEP 2 Install Rasbian in SD Card
I’m using the latest Raspberry Pi Image called Pixel which you can download here
and load the the image to the sd card.
When you are done, located the file config.txt from the Boot drive of the sdcard and insert this at the end
then save the file, and locate the file called cmdline.txt and insert this text right after rootwait
when done, save the file and you can now insert the sd card into the raspberry pi zero
to access your raspberry pi from your computer, use ssh client Or VNC Viewer and point it to
raspberrypi.local with 20port
Now it’s all done
Put the raspberry pi in the case if you have printed in my given links
You may also like to read these articles
Hope my article “HOW TO BUILD USB DONGLE COMPUTER WITH RASPBERRY PI ZERO A 5$ COMPUTER” helps you to BUILD USB DONGLE COMPUTER WITH RASPBERRY PI ZERO. if you have any query, feel free to comment.